Description
The X-9000 1-2 harness is a replacement harness for the Version 2 X-9000 power controller. It replaces a damaged, broken or corroded harness so the controller can communicate properly with the rest of your bike again.
Why replace your X-9000 1-2 harness?
Wiring problems are behind many electric dirt bike faults. A pinched wire, broken plug or corroded pin in the harness can cause cutting out, error messages or a bike that will not power up. When the X-9000 1-2 harness is damaged, replacing it with the correct part is the fastest way to get back on the trail – and far simpler than splicing wires.
- Replacement 1-2 harness for the Version 2 X-9000 controller
- Replaces damaged, broken or corroded harnesses
- Restores reliable connections to the controller
- Correct connectors for a plug-in replacement
- Handy spare for X-9000 owners
Check your controller version
This harness suits the Version 2 X-9000. Version 1 controllers have the standard logo, while Version 2 controllers carry a “Powered by CYC” label. Harnesses for different versions are not interchangeable, so check before ordering or send us a photo of your controller label.
Fitting tips
- Turn the bike off and disconnect the battery before starting
- Photograph the existing connections and routing before removing the old harness
- Fit the new X-9000 1-2 harness along the same path, away from sharp edges and moving parts
- Make sure every connector clicks fully into place, then test the bike before refitting covers
Diagnose first
Before replacing any harness, check the simple things: battery terminals, the main fuse or airswitch, and any obvious loose plugs. If you find a damaged section of the 1-2 harness, or faults come and go when you wiggle the wiring, replacement is the reliable fix.
Protect your wiring
Secure the harness with cable ties, keep it clear of the swing arm and steering, and avoid pressure washing around connectors. A little dielectric grease on exposed plugs helps keep moisture out.
Fitment and compatibility
This harness is for the Version 2 X-9000 power controller. Contact us if you have a different version.
More X-9000 parts
Browse motors and controllers and power upgrades for displays, throttles, cables and more.
X-9000 1-2 harness FAQ
Which controller is it for?
The Version 2 X-9000.
Will it fit a Version 3 controller?
No. Check your controller version before ordering.
If you tune or service several X-9000 bikes, keeping a spare harness on the shelf means a damaged loom never keeps a bike off the trail for long.
Buying x-9000 1-2 harness with confidence
Every order is backed by our refund and returns policy and your rights under Australian Consumer Law. If something is not right when your x-9000 1-2 harness arrives, get in touch and we will work through it with you. You can also read our full terms and conditions before you order.
Ordering tips
Before you order x-9000 1-2 harness, check your bike model and year and compare your existing part with the photos on this page. If anything looks different, or your bike has been modified, send us a photo and we will confirm fitment before it ships.
Why buy x-9000 1-2 harness from Electric Dirt Bikes?
We specialise in SurRon, Talaria and E-Ride Pro electric dirt bikes, parts and upgrades. When you order x-9000 1-2 harness from Electric Dirt Bikes, you can talk to our team about fitment and setup before you buy – just contact us with your bike model and year and we will point you in the right direction.
For background on the bike platform itself, visit the official SurRon website.
Product notes
This x-9000 1-2 harness is a genuine replacement for the Version 2 X-9000 power controller. Order one if the original has been damaged or you need a spare.
